Allure Carbon 24″ (540) clincher
Carbon wheel
- 24″ / ETRTO 24″ (540) clincher
- Rim width : 26mm
- Weight : 1840 g
- Carbon weave : 3K
- Push rims : Fully integrated ergonomic carbon push rim
- Axle diameter : Stainless steel bearings 1/2″
- Axle length : 53.8mm
- Weight: 920g (32.5 oz)/wheel (including handrim)
*Axle not included
- Axle head: axle length 20.2mm – axle diameter 29.6mm
- Rim tape
- Valve extension
Refer to the table below for the tire pressures in relation to the section marked on the tyre.
| Tire section mm |
max. pressure (bar) |
max. pressure (psi) |
|---|---|---|
| 23 | 7,8 | 113 |
| 24 | 7,5 | 109 |
| 25 | 7,3 | 106 |
| 26 | 7,0 | 102 |
| 27 | 6,8 | 99 |
| 28 | 6,6 | 95 |
| 29 | 6,3 | 92 |
| 31 | 6,1 | 88 |
| 31 | 5,8 | 85 |
| 32 | 5,6 | 81 |
Do not remove the tire with any metal tool.
The minimum tire section is 23 mm and the maximum 32 mm.
For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.
The original CORIMA braided rim tape is mandatory. If it is damaged it must be the replaced.
CORIMA clincher wheels are not compatible with tubeless conversion kits.
Only tires with inner tubes are acceptable (except latex inner tubes).
Co2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.
If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.
User’s manual – MCC EVO
User’s manual – WS EVO
User’s manual – ESSENTIA 40
User’s manual – ALLURE CARBON FIT
User’s manual – Older models
User’s manual – Older models (Italian)
User’s manual – Older models (Spanish)
User’s manual for CORIMA composite cork brake pads (red)
User’s manual for CORIMA synthetic brake pads (grey)
Check the compatibility of CORIMA wheels with bike frames
Products catalog